Why the oil dipstick does not mark? The dipstick is a component made of metal, there are various sizes and designs on the market, which will depend on the type of engine. On many occasions, they do not mark the correct reading of the engine oil, for various reasons, such as lack of oil, fluid leaks, a car parked in the wrong position to take the measurement, and even the wrong dipstick for the type of engine. Here we tell you everything you need to know about this discreet, but important piece.
Table of Contents
What is dipstick oil dipstick?
The rod of the oil level It is a metallic piece, of slightly different sizes, it is used to know exactly the amount of lubricant that the engine of a vehicle has.. A car engine requires a specific amount of oil to stay lubricated and run well. To verify the amount in the crankcase, a metal rod is used that has a ring at one of its ends and two marks showing the maximum and minimum levels of the liquid in the engine.
Causes of No Oil on Dipstick
There are several causes that lead to the dipstick not having oil, let’s get to know them:
1. Low oil level
It is usually one of the main reasons for no oil on the dipstick. Other recurring cause Low oil level is due to not adding the correct amount of oil. Motor oil. Motors have different capacities so they depend on the design. It is important to know what the recommended amount of this fluid is in a given engine. It is best to check the engine oil in the morning before starting the vehicle.
2. Oil leaks
As usual, oil leaks occur from bad valve sealsor by cracks in the engine due to wear. These leaks in the supply lines cause leaks in the engine oil and leak when the fluid is refilled in the engine. The F’sLeaks possibly cause the dipstick to not indicate any oil level, so it comes out dry.
3. Increased oil consumption by the engine
If you notice that there is no oil on the dipstick with a cold engine, and after a normal maintenance service, it is due to excessive oil consumption.. It’s a indicator that the engine is presenting serious faults, with defective internal parts. For example: a damaged cylinder head gasket, can lead to more than normal oil consumption. The head gasket forms a seal between the engine block and this part. Broken or defective seals consume more oil, so the dipstick does not detect oil in the sump.
4. You don’t know how to check the dipstick
Checking the oil dipstick is a very easy task. The car must be on a level surface before checking the dipstick. In In the event that the vehicle is in a tilted position, it affects the dipstick results.in some cases can show no oil, because the crankcase is empty. It can also occur because the rod has not been inserted correctly to the bottom.
- We recommend you see: how to read oil dipstick
What to do if there is no oil on the dipstick?
In the event that the dipstick does not indicate any oil level, but neither did the engine oil warning light come on on the dashboard. The following precautions should be taken:
- In the first place, do not start the engine, until the cause of why the oil dipstick comes out dry has been verified.
- Make sure that the vehicle is parked on a flat surface, that is, it must be in a position that does not affect the oil gauge reading.
- If the car’s engine is hot, you should wait at least an hour for the engine to cool down. This is because the liquid adheres to the rod more easily when it is cold. Waiting for the engine to cool down ensures that oil trapped anywhere in the engine can be returned to the crankcase.
- After all these steps you will be able to discover the reasons why the rod is dry. Make sure there are no oil leaks.
One way to check is to drain all the oil from the engine and confirm the existing amount. After this process, you need to refill the oil in the engine. Immediately proceed to check the dipstick. The dipstick should go in until it touches the bottom of the crankcase. In the event that the dipstick does not have oil, then it is because this part is defective or it is not the correct one, due to an erroneous change in a mechanical workshop.
It may interest you: How much does an oil change cost in the USA?
conclusion
A vehicle should never run out of motor oil, this can cause serious failures, and the conditions will not be optimal. Keeping the correct amount of fuel in the car is a good way to ensure an engine in excellent condition. Lack of oil on a dipstick can represent a failure in the measurement process and readingif it is not done correctly.
Frequent questions
What happens if there is no oil in the car engine?
Engine oil has the function of ensuring that the contact between the internal parts is the best. When you’re out of oil, parts start rubbing against each other, leading to serious engine problems. How to know if the engine is damaged due to lack of oil? Symptoms such as white smoke from the engine and a knocking sound from the engine may be warning you.
Is it safe to drive without an oil dipstick?
Driving without the respective dipstick does not represent any danger, as long as it is not frequent. Debris may not enter the engine through the open hole where the dipstick is inserted, in a short run. But, on a dirt and dusty ride, it’s risky to drive without a dipstick. excess of oil pressure in the crankcase, it causes the oil to flow out without the respective dipstick, increasing the risk of oil contamination.
How long can an engine run without oil before it breaks down?
Everything will depend on the engine and its construction. Usually the crankshaft and connecting rod bearings break down in seconds. On some vehicles it may show symptoms within minutes, while on others it will take time for it to stop working.
What happens if the oil level is too high?
When there is excessive oil in the engine, it goes to the crankshaft. Because oil moves at high speeds in the engine, it is a matter of time before the oil mixes with air and becomes foamy, and does not lubricate effectively.
Why is the oil light on?
In case the oil light is on on the dashboard, it should not be ignored, it will avoid serious engine failure. There are certain causes that the oil light comes on, even if you have the correct amount of oil, but it can be due to:
Worn oil sensor: this part has the function of controlling the oil pressure and allows to know when it is too low. A worn sensor can send wrong signals and lead to the oil light coming on.
Defective oil pump: this component hinders the correct circulation of the oil.
Writing Gossipvehicle
